3D printer with scanner: combo or buy separately?
Updated 2026-11-10 · Pick: 3DMakerpro Seal Lite 3D Scanner (pair with QIDI Q2): $344 through this link, discount applied in 3DMakerpro's cart (tested on this model 2026-11-13); store.3dmakerpro.com without the link $359, checked 2026-11-13: https://dealectric.com/go/3dmakerpro-seal-lite-3d-scanner
Short answer. Creality's 3D printer with scanner combos are a separate 3D scanner and printer in one order, and they save only 8–15% over buying the same two separately. Better buy: a 3DMakerpro Seal Lite scanner (rated 0.02 mm) plus a QIDI Q2 printer, $664 combined.
Searched as: 3D printer with built in 3D scanner combo models 2026
How this table was made: each figure comes from the maker's own US product page or manual, or from the reviewer named next to it, checked 2026-11-10. Dealectric does not test units itself. Rows with a Buy link are products Dealectric lists: the links are affiliate links, and their codes are re-tested in the brand's own cart every day (last check 2026-11-13).
| Model | What you get | Scanner + printer total | Same two parts bought separately | Real saving | Store's 'Save' label | Price | Buy |
|---|---|---|---|---|---|---|---|
| 3DMakerpro Seal Lite 3D Scanner (pair with QIDI Q2) | Scanner: blue light, mono, rated 0.02 mm accuracy (3DMakerpro) | $664 with QIDI Q2 ($215 + $449) | $664: this is the separate route | No bundle; $594.20 less than the cheapest Creality combo ($1,258.20) | None; list $359, now $215 | $359 on store.3dmakerpro.com, 2026-11-13 | $344 through this link discount applied by the link; tested 2026-11-13 |
| QIDI Q2 3D Printer | Enclosed printer, 270 × 270 × 256 mm, 65 °C active chamber heating, 370 °C nozzle (QIDI) | $664 with Seal Lite; $688 with Moose Lite | Sold on its own; takes STL from any scanner | No bundle | None; list $649, now $449 | $449 on qidi3d.com, 2026-11-06 | Buy |
| 3DMakerpro Moose Lite 3D Scanner (pair with QIDI Q2) | Scanner: near-infrared, rated 0.05 mm, 0.10 mm resolution, objects 15–1500 mm (3DMakerpro) | $688 with QIDI Q2 ($239 + $449) | $688: this is the separate route | No bundle; $570.20 less than the cheapest Creality combo | None; list $689 | $239 (maker, 2026-11-10) | |
| Creality K1 Max + Raptor combo | K1 Max printer + CR-Scan Raptor blue-laser scanner (named in the title) | $1,258.20 | $1,428.00 ($549 + $879) | $169.80 (11.9%) | Save $1,039.80 | $1,258.20 (maker, 2026-11-10) | |
| Creality K2 Pro Combo + Raptor Pro combo | K2 Pro Combo printer (300 × 300 × 300 mm) + Raptor Pro scanner | $2,009.00 | $2,248.00 ($749 + $1,499) | $239.00 (10.6%) | Save $539.00 | $2,009 (maker, 2026-11-10) | |
| Creality K2 Plus + Raptor Pro combo | K2 Plus printer + Raptor Pro scanner; the page doesn't say whether the CFS color unit is included | $2,209.00 | $2,398.00 without CFS ($899 + $1,499); $2,598.00 with CFS ($1,099 + $1,499) | $189.00 (7.9%) to $389.00 (15.0%) | Save $589.00 | $2,209 (maker, 2026-11-10) | |
| Creality Otter Lite + 3D Printer (All-In-One Combo) | Otter Lite scanner + a printer the page doesn't name; 'Combo Details' section is empty | $1,606.00 | Printer unnamed, so there's no separate total; Otter Lite alone is $759 | $1,606 − $759 = $847 pays for an unnamed printer | Save $602.00 | $1,606 (maker, 2026-11-10) |
What the differences mean
- K1 Max + Raptor: $549.00 + $879.00 = $1,428.00 separately; $1,428.00 − $1,258.20 = $169.80, or 11.9%. The store's label says $1,039.80, about 6 times the real figure.
- K2 Pro Combo + Raptor Pro: $749.00 + $1,499.00 = $2,248.00; $2,248.00 − $2,009.00 = $239.00, or 10.6%. The label says $539.00.
- K2 Plus + Raptor Pro: with the CFS, $1,099.00 + $1,499.00 = $2,598.00, a saving of $389.00 (15.0%). Without it, $899.00 + $1,499.00 = $2,398.00, a saving of $189.00 (7.9%). The label says $589.00.
- Seal Lite + QIDI Q2: $215 + $449 = $664, which is $1,258.20 − $664 = $594.20 less than the cheapest Creality combo.
- Moose Lite + QIDI Q2: $239 + $449 = $688.
| What you scan and print | Setup | Why |
|---|---|---|
| Small parts, knobs, clips, figurines | Seal Lite + QIDI Q2, $664 | Highest rated accuracy here (0.02 mm, 3DMakerpro's rating) at the lowest total |
| Bigger objects such as helmets, panels and furniture parts | Moose Lite + QIDI Q2, $688 | 3DMakerpro lists a 15–1500 mm object range |
| One Creality order with a blue-laser scanner | K2 Plus + Raptor Pro, $2,209 | Largest real bundle saving, $389 (15.0%), if the CFS is included |
Start with the scanner: $359 on store.3dmakerpro.com, $344 through this link: https://dealectric.com/go/3dmakerpro-seal-lite-3d-scanner. Then add the printer: $449: https://dealectric.com/go/qidi-q2.
Why a combo doesn't buy you a better scan-to-print workflow
In these combos the scanner and the printer never connect to each other. Creality's own CR-Scan Otter guide describes the steps: plug the scanner into a computer's USB 3.0 port and scan in CrealityScan. Then export the model as STL and open it in the Creality Print slicer, which sends it to the printer. For that scanner the computer needs Windows 10/11 64-bit (at least an 8th-gen Intel i5 with 8 GB RAM, 16 GB recommended) or macOS 10.15.7 or later. Any printer that accepts an STL file fits these steps, so the box adds nothing technically. What it adds is a discount, and on today's prices that discount is $169.80–$389.00. The 'Save' labels look bigger because they're measured against compare-at prices. For example, the K1 Max + Raptor's $2,298 compare-at is $870 above the $1,428 the two parts cost on their own today.
Not recommended
Creality Otter Lite + 3D Printer (All-In-One Combo), $1,606. Its product page doesn't name the printer and its 'Combo Details' section is empty. With the Otter Lite at $759 on its own, $847 of the price goes to a printer you can't identify before you pay. The same Otter Lite plus a QIDI Q2, a named enclosed 270 × 270 × 256 mm printer, costs $759 + $449 = $1,208, which is $398 less.
Sources
- K1 Max + Raptor combo: $1,258.20, compare-at $2,298.00, 'Save $1,039.80' (read 2026-11-10) — store.creality.com
- K1 Max printer alone: $549.00 (read 2026-11-10) — store.creality.com
- CR-Scan Raptor alone: $879.00, 'Metrology Grade Accuracy, 7 Blue Laser Lines' (read 2026-11-10) — store.creality.com
- Raptor Pro alone: $1,499.00 (read 2026-11-10) — store.creality.com
- K2 Pro Combo + Raptor Pro: $2,009.00, 'Save $539.00' (read 2026-11-10) — store.creality.com
- K2 Pro Combo alone: $749.00; 300 × 300 × 300 mm (read 2026-11-10) — store.creality.com
- K2 Plus + Raptor Pro: $2,209.00, 'Save $589.00'; contents not listed (read 2026-11-10) — store.creality.com
- K2 Plus without CFS $899.00; K2 Plus + CFS×1 $1,099.00 (read 2026-11-10) — store.creality.com
- Otter Lite + 3D Printer combo: $1,606.00, 'Save $602.00'; printer not named (read 2026-11-10) — store.creality.com
- Otter Lite scanner alone: $759.00 (read 2026-11-10) — store.creality.com
- Seal Lite: $215, list $359, 0.02 mm accuracy (read 2026-11-10) — store.3dmakerpro.com
- Moose Lite: $239, list $689, 0.05 mm accuracy, 0.10 mm resolution, 15–1500 mm range (read 2026-11-10) — store.3dmakerpro.com
- QIDI Q2: $449, list $649, 270 × 270 × 256 mm, 65 °C chamber heating (read 2026-11-10) — qidi3d.com
- Scan-to-print steps and computer requirements for the CR-Scan Otter: USB 3.0, CrealityScan, STL export to Creality Print (Creality forum post, read 2026-11-10) — forum.creality.com
Published 2026-11-10; updated 2026-11-10. The buy links are affiliate links; see the disclosure. Corrections welcome at [email protected] or /feedback.