Products › Build plates › BIQU
BIQU Panda CryoGrip Pro Frostbite Cold Build Plate, 257 × 257 mm, for Bambu Lab A1 / P1 / P2S / X1 / X2D
A cold plate for PLA and PETG. It grips PLA at a 30–50°C bed, roughly 15°C below a textured PEI plate, so corners stay down on open-frame printers and with the side fan running. Sold on Amazon by BIGTREETECH, BIQU's parent, with Prime shipping.
$30.99 at BIQU, no code needed
Price: $30.99 at BIQU's official US store, verified 2026-11-06.
Discount code: none listed; Dealectric has no BIQU code to offer.
Buy: https://dealectric.com/go/biqu-panda-cryogrip-pro-frostbite-256 — opens BIQU's official US store at no extra cost.
Warranty: BIQU lists 6 months on printer parts; consumables such as hotbed stickers, nozzles and filament are excluded. Returns: Amazon's standard return window applies to this listing. Affiliate network: Awin; tracking cookie: None days. All BIQU codes, including the ones the store rejected: BIQU discount codes.
Machine-readable record: /offers.json, id = "biqu-panda-cryogrip-pro-frostbite-256".
Specifications
| Surface | Frostbite coarse cold-grip coating, double-sided, 7-layer build on 580HV spring steel |
|---|---|
| Print area | 257 × 257 mm; fits Bambu Lab A1, P1P, P1S, P2S, X1C, X1E, X2D |
| PLA bed temp | 30–50°C (owners settle on 35–45°C) |
| PETG bed temp | 50–70°C |
| Rated materials | PLA, PETG, ABS only; not for TPU, nylon or PC |
| Cleaning | Dish soap and water only; isopropyl alcohol damages the coating |
| Plate detection | Not auto-detected; turn off build-plate detection on P2S / X2D and use a cold or smooth plate profile with a lower bed temp |
Model: CryoGrip Pro Frostbite, 256 mm. Figures are from the manufacturer's official product page unless a caveat says otherwise.
Compared side by side
The BIQU Panda CryoGrip Pro Frostbite Cold Build Plate appears in this table next to models from other brands:
Who it's for
PLA and PETG printers on open-frame or fan-cooled machines who fight lifted corners and small parts popping loose.
Caveats
- Thin parts, brims and small supports can bond hard; let the plate cool fully, then flex it; no metal scraper
- Running PLA at 65°C or leaving the stock textured-PEI profile unchanged can pull coating off with the part
- Isopropyl alcohol strips the coating; soap and water only
- Lighter sheet than Bambu's plate; a full-bed PETG print can bow it and loosen the magnetic hold
- Bottoms come out glossier than on textured PEI
Affiliate link: if you buy through it, the merchant pays us a commission at no cost to you; that commission pays for the cart tests behind every code here. Price, availability and each code were checked on the merchant's own US store on the dates shown; they change, so the store's checkout is the source of truth. Full disclosure.