Dealectric

Projector for church service: the projector and the cable run from the booth

Updated 2026-11-10 · Kit: Church sanctuary projector kit (Panasonic PT-VMZ62 6 + AV Access 4KEX70-H2 HDBaseT HDMI Extender Kit), one Amazon link that puts both in your Amazon cart: https://www.amazon.com/gp/aws/cart/add.html?AssociateTag=dealectric-20&ASIN.1=B0H46WFD51&Quantity.1=1&ASIN.2=B073QL6YT3&Quantity.2=1

Short answer. For church service in a lit sanctuary, pair a 6,500-lumen WUXGA laser projector, the Panasonic PT-VMZ62, with the AV Access 4KEX70-H2 HDBaseT kit: plain HDMI carries 1080p only 49 ft, the kit 197 ft over Cat5e/6 from the booth.

Searched as: church sanctuary projector buying guide brightness ambient light laser WUXGA Epson BenQ 2026

How this table was made: each figure comes from the maker's own US product page or manual, or from the reviewer named next to it, checked 2026-11-10. Dealectric does not test units itself. Rows with a Buy link are products Dealectric lists: the links are affiliate links, and their codes are re-tested in the brand's own cart every day (last check 2026-11-13).

ModelJob in the setBooth-to-projector reachDeciding specFitsPriceBuy
PT-VMZ62Projector: 6,500 lm WUXGA laser for a lit sanctuaryTakes the receiver's HDMI; also has a DIGITAL LINK (HDBaseT) port1920×1200; throw 1.09–1.77:1; 280 W Normal, 320 W max (Panasonic)Mount 11.6–18.8 ft from a 150-inch 16:10 screen$3,599 on Amazon (checked 2026-11-12)Buy on Amazon
4KEX70-H2Booth-to-ceiling signal link (transmitter + receiver)197 ft on Cat5e/6, 230 ft on Cat6a at 1080p; plain HDMI 49 ft (AV Access)Lists 1920×1200@60; one 18 V adapter powers both ends; direct cable onlyCable routes of 49–197 ft (230 ft on Cat6a)$156.74 on Amazon (checked 2026-11-12)Buy on Amazon
Epson PowerLite L690UAlternative projector with a longer-throw lensBuilt-in HDBaseT port: 100 m (328 ft) on Cat5e STP with an Epson transmitter6,500 lm WUXGA laser; throw 1.35–2.20:1 (ProjectorCentral); 415 W NormalMount 14.3–23.3 ft from a 150-inch 16:10 screen$3,515 (maker, 2026-11-10), out of stock
Epson ELPHD02 HDBaseT TransmitterEpson's booth-end transmitter for the L690U's HDBaseT portUp to 100 m (328 ft) on Cat5e STP, per the L690U-series guide2× HDMI + USB inputs; ships with its own AC adapterAn L690U fed straight into its HDBaseT port, with no receiver box$346 (maker, 2026-11-10)
AV Access 4KEX100-H2Longer-reach signal link (transmitter + receiver)1080p 100 m (330 ft) on Cat5e/6; 4K 70 m on Cat5e/61920×1200 not on its resolution list; 13 W for the pairCable routes of 197–330 ft$296.99 (maker, 2026-11-10)

What the differences mean

Your sanctuaryWhat fits
Booth-to-projector cable route under 49 ftPT-VMZ62 with a plain HDMI cable
Route of 49–197 ft (to 230 ft on Cat6a)PT-VMZ62 plus the 4KEX70-H2 kit
Route of 197–330 ftAV Access 4KEX100-H2, or the L690U with Epson's ELPHD02 (100 m)
Mount more than 18.8 ft from a 150-inch screenEpson L690U (to 23.3 ft)

The kit: The kit: Church sanctuary projector kit (Panasonic PT-VMZ62 6 + AV Access 4KEX70-H2 HDBaseT HDMI Extender Kit), one Amazon link that puts both in your Amazon cart: https://www.amazon.com/gp/aws/cart/add.html?AssociateTag=dealectric-20&ASIN.1=B0H46WFD51&Quantity.1=1&ASIN.2=B073QL6YT3&Quantity.2=1: the PT-VMZ62 on the ceiling, with the 4KEX70-H2 transmitter at the booth and its receiver plugged into the projector's HDMI input. They're joined by one Cat5e/6 or Cat6a cable cut to your measured route. The cable isn't included.

Getting the picture from the booth to the ceiling

Measure the cable route, not the straight line. That means up the booth wall, across the ceiling and down to the mount. AV Access's own table gives a passive HDMI cable 49 ft at 1080p, 33 ft at 4K30 and 10–16 ft at 4K60. A booth at the back of a sanctuary is usually past 49 ft of route, so the signal has to go over HDBaseT on a Cat cable. The 4KEX70-H2 reaches 197 ft on Cat5e/6 and 230 ft on Cat6a at 1080p@60. AV Access lists 1920×1200@60, the PT-VMZ62's native resolution, among its supported modes. Its distance table names 1080p only, so treat 197 ft as the limit at WUXGA too. If you feed it a 4K source, the reach falls to 115 ft on Cat5e/6.

Wire it the way AV Access specifies:

One 18 V adapter at either end powers both boxes (12.8 W for the pair). Put it at the booth, and the ceiling only needs the projector's own outlet.

If you choose the Epson L690U instead, its built-in HDBaseT port takes Epson's ELPHD02 transmitter directly, with no receiver box. Epson's guide calls for Category 5e STP or better and up to 100 m (328 ft). It also warns that turning on HDBaseT Control Communications switches off the projector's own LAN and RS-232C ports.

Sources

Published 2026-11-10; updated 2026-11-10. The buy links are affiliate links; see the disclosure. Corrections welcome at [email protected] or /feedback.