Products › 3D printers › QIDI
QIDI Plus5 Enclosed CoreXY 3D Printer, 65 °C active chamber heating, 370 °C nozzle, 320 × 320 × 300 mm
The successor to the Plus 4 adds 18 percent more build volume, a 550 W chamber heater and load-cell leveling. For ABS and ASA parts over 10 inches it is the least expensive printer with a 65 °C chamber.
$699 at QIDI, no code needed
Price: $699 (list $749) at QIDI's official US store, verified 2026-11-06.
Discount code: none of the QIDI codes we tested applies to this product (last cart test 2026-11-10).
Buy: https://dealectric.com/go/qidi-plus5 — opens QIDI's official US store at no extra cost.
Warranty: 1 year from the date you receive the printer under QIDI's warranty statement; consumables such as nozzles, hotends and build plates are excluded.. Returns: QIDI web store: no-reason returns within 14 days of receipt per its return policy page; used or incomplete returns may be refunded only in part, and the buyer pays return shipping if no fault is found. Confirm the window at checkout.. Affiliate network: Awin; tracking cookie: None days. All QIDI codes, including the ones the store rejected: QIDI discount codes.
Machine-readable record: /offers.json, id = "qidi-plus5".
Specifications
| Build volume | 320 × 320 × 300 mm (30.7 L) |
|---|---|
| Chamber heating | Active, up to 65 °C (3rd-gen 550 W heater) |
| Max nozzle temperature | 370 °C, hardened bimetal nozzle |
| Max bed temperature | 120 °C, 500 W full-surface silicone heater |
| Motion | CoreXY with linear guide rail on X and 9 mm 1.5GT belts |
| Leveling | Load cell built into the hotend |
| Filtration | 3-stage air filter |
| Noise | 48 dB in normal use, measured by a reviewer |
| Net weight | 29 kg (64 lb) |
| Dimensions | 500 × 488 × 558 mm |
Model: Plus5. Figures are from the manufacturer's official product page unless a caveat says otherwise.
Compared side by side
The QIDI Plus5 Enclosed CoreXY 3D Printer appears in these tables next to models from other brands:
- 3D printer with enclosure: which ones actually heat the chamber
- Best 3D printer for functional parts: which chambers actually heat
Who it's for
Makers printing large ABS, ASA, PC or nylon parts, such as helmets, enclosures and brackets up to 12.6 inches square, who do not need Bambu-style multi-color.
Caveats
- Print PLA and TPU with the lid and door open; the insulated chamber causes heat-creep clogs otherwise.
- The predecessor Plus 4 had owner fire reports tied to the chamber-heater relay in late 2024 and 2025; QIDI shipped replacement relays. The Plus5 uses a new heater design, but we found no independent safety test of it.
- Multi-color needs the separate QIDI Box, which reviewers found unreliable on the Q2.
- A 64 lb printer: plan for a sturdy table.
Affiliate link: if you buy through it, the merchant pays us a commission at no cost to you; that commission pays for the cart tests behind every code here. Price, availability and each code were checked on the merchant's own US store on the dates shown; they change, so the store's checkout is the source of truth. Full disclosure.